[Python] Netmiko Pattern Not Detected

I ran this code with cisco 2960X switch.

from netmiko import ConnectHandler

network_device= {
"host": "192.168.xxx.xxx",
"username": "xxxx",
"password": "xxxx",
"device_type": "cisco_ios",
"session_log": "netmiko_session.log"
}

connect= ConnectHandler(**network_device)
connect.enable()

interface_name= "GigabitEthernet1/0/10"

def send_command(command):
return connect.send_command(command)
try:
send_command('enable')
send_command('configure terminal')
except Exception as e:
print(e)
print("Failed!")


But after I got below error.

Pattern not detected: 'Switch\\#' in output.

Things you might try to fix this:
1. Explicitly set your pattern using the expect_string argument.
2. Increase the read_timeout to a larger value.
You can also look at the Netmiko session_log or debug log for more information.

Failed!


Please check below to netmiko_session.log

Switch#
Switch#terminal width 511
Switch#terminal length 0
Switch#
Switch#enable
Switch#
Switch#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#


I renamed switch hostname. But also same error going.

Continue reading...